I made a custom radiator shroud for my TR250 out of black ABS plastic sheet. It
is available in 1/8 and 3/16 inch thicknesses. Really works great! I didn't have
a pattern so had to free hand it but I imagine you could use your fiber board
one as a pattern.
Jim
Jim Bauder
480-309-9525
'68 TR250 CD47L
Scottsdale, AZ
http://www.triumphowners.com/647
-----Original Message-----
From: triumphs-bounces@autox.team.net [mailto:triumphs-bounces@autox.team.net]
On Behalf Of terryrs@comcast.net
Sent: Thursday, May 21, 2009 5:26 PM
To: triumphs@autox.team.net
Subject: [TR] Radiator Duct
When I rebuilt the 3A, I thought to stay ahead of the game. I purchased a
fiberboard radiator duct from one of the big 3, but read on the List these
tended to disintegrate over time. So, I spray painted the thing several times
with rubberized undercoating hoping to forestall that event.B Alas, it was
apparently inevitable.
Anyone have a longer term (read "forever") solution making this out of another
material?
Terry Smith, '59 TR3A
New Hampshire
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
You are subscribed as jimbpps@cox.net
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|