If you took the cam off the dist. shaft, I think you can put it on
180 degrees off. (I think I did it once)
Allen
>
> Anyway, found that the distributor dropped onto the oil pump shaft
> slot
> in only one orientation. Looks like it should be able to mate up if it
> is rotated 180 however it does not.
>
> The reason I ask is I appear to be 180 out when on TDC of the
> compression stroke.
>
> I did disassemble the distributor to look at and lubricate the innards
> and am wondering if I put something back together 180 out.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|