> is there a chance that I can turn a FLAPS-bought steel 3/16" tubing BUBBLE
> FLARE into a DOUBLE FLARE?
In theory, yes. In practice it may be impossible.
> If so, how?
Put it in your flaring tool positioned as though you were partway through
the second operation, and complete the operation by forcing the top of the
convex 'bubble' down to become concave.
But I have to think it would be easier to find a double flare line at your
FLAPS. The pre-made lines seem to be much harder than the flaring tools are
designed to accommodate. If you really must make your own lines, I'd
suggest buying a coil of fully annealed line from JCW or JEGS or similar.
You might even be able to order it at your FLAPS.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|