Randall, Jim, and John, Thanks for your insights. I do know that the PDWA
works be cause it takes me as long to re-center the PDWA after I bleed the
brakes as to bleed the brakes.
I will reexamine the seals as there must be some damage somewhere to cause
such a catastrophic failure. The dark color of the brake fluid says to me
that there was some disintegration of the seals, but I would have thought that
this would cause a gradual failure and wouldn't "heal" from a complete
failure. Thanks. Bob (still looking...)
> From: tr3driver@ca.rr.com
> To: triumphs@autox.team.net
> Date: Fri, 24 Apr 2009 13:49:08 -0700
> Subject: Re: [TR] Master Cylinder help
>
> > The other was that one circuit had
> > failed previous and when the second failed I was left with no braking.
> > I,however, don't see how I wouldn't have noticed the diminished braking
> > ability,
>
> FWIW, when I bought my second Stag and drove it home (OK to CA), apparently
> it's rear brakes had not been working for a long time. I didn't notice,
the
> previous owner didn't notice; possibly even the owner before that didn't
> notice. The rear brakes just don't contribute that much unless you are in
> the habit of making near-panic stops. Which is how I discovered that they
> didn't work.
>
> The other Stag suffered a failure somewhat similar to yours, except that I
> never found out if it would "cure itself" by the next day. I was already
on
> my way to a shop to have it repaired when the hydraulic brakes quit working
> completely. Then the handbrake quit too (but that's another story). The
> shop pulled the MC with no further tests, and I found that both seals were
> torn; not out by the edge where it would be visible, but in the flat
portion
> that sits inside the groove on the piston. No idea if they both tore at
the
> same time, or if one had already been like that for some time.
>
> Of course the Stag MC is quite a bit different than the TR6, so that may
not
> be your problem. But I don't see how else you could lose both sides at
> once.
>
> Maybe the PDWA isn't as useless as most people seem to think?
>
> Come to think of it, is there any chance your PDWA has been modified so
that
> it no longer keeps the two circuits separate?
>
> -- Randall
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as r_rochlin@hotmail.com
>
> http://www.team.net/archive
_________________________________________________________________
Rediscover Hotmail.: Get quick friend updates right in your inbox.
http://windowslive.com/RediscoverHotmail?ocid=TXT_TAGLM_WL_HM_Rediscover_Upda
tes2_042009
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|