Victory-British carrries a rebuild kit for it, vey easy and straight forward
----- Original Message -----
From: "Michael Lang" <mlang99@comcast.net>
To: "triumph list" <triumphs@autox.team.net>
Sent: Saturday, April 18, 2009 11:57 PM
Subject: [TR] Fuel Valve Packing
> Randall,
>
> I remember reading a post from you where you told about rebuilding your
> fuel shut off valve. I haven't been able to find it again by searching
> the archives. The packing in the valve on my 57 TR3 is as hard as a
> rock. I have considered using a short section of fuel hose that is the
> proper OD as a replacement, but I seem to remember you saying something
> about using o-rings. What exactly was it that you did as a repair?
>
> Thanks,
>
> Mike
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as frede.thomas2@verizon.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|