Yes, the adjustment screw is fully backed off.
Scott Suhring
Mechanicsburg, PA
'70 TR6
'59 TR3
-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of Geo Hahn
Sent: Sunday, April 12, 2009 11:12 PM
To: TR List
Subject: Re: [TR] TR3A Rear Brake Drum
I wouldn't favor turning the drum just to fit it -- if it is a 10" drum that
is fairly rare and expensive metal to just scrape away.
Have you backed off the adjustment screw? This might allow for whatever
small difference you may have in the new cylinder.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|