In a message dated 4/11/2009 8:10:37 A.M. Eastern Daylight Time,
jgillis@tcd.ie writes:
>
. I managed to figure out how it all goes together except
> for which side the rail with the adjustment lever goes, is it
> inside, i.e gearbox tunnel side or outside, i.e door side?.
> Thanks in advance
> John
> 1954 TR2 (long door)
John:
According to TRA's guide "The seat slides were mounted to the body with
cadmium plated slotted body bolts, with the lock release lever assembly
mounted
on the outboard side. This lever is marked "A. W. Chapment / Leveroll /
London S. W.6".
Hurry up John, real spring is about three weeks away!
Lou Metelko
Auburn, Indiana
**************Feeling the pinch at the grocery store? Make dinner for $10 or
less. (http://food.aol.com/frugal-feasts?ncid=emlcntusfood00000001)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|