> Looking at the wiring diagram, the only thing the ammeter
> does is measure amp flow.B So if I don't want to measure it,
> it lookes like I can just remove the gauge and connect the
> two wires directlyB together.B Am I missing something?
Nope, that's all that is required. You could even eliminate those two wires
running under the dash, and run a new wire from the 'A' terminal on the
regulator over to the starter solenoid.
Gonna replace the oil pressure gauge with a modern style idiot light, too?
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|