At 11:11 PM 2/11/2009, Michael Lang wrote:
>I have now tried all sorts of things to get the hubs off of my TR3 axles.
<snip>
Mike, find a local shop that works on trucks. I took my axle
assemblies to my local friendly truck shop, where they were set up to
do work like that. Their 100T press didn't break a sweat, but I sure
did when the hubs popped loose. They made one hell of a bang (ok, 2
bangs). There's no chance that the special Churchill tool could have
handled it. And it is critical to support the hub all the way
around else it'll bend (don't ask....)
jim
--
J.C. Hassall
Blacksburg VA
'63 TR4 in autox preparation
96% finished, 90% to go
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|