On 10 Feb 2009 at 16:19, Gary Nafziger wrote:
> I tackled a tr-6 transmission rebuild out of part ignorance...
> Assembly was a bitch initially because
I've finally started putting my GT6 transmission back together.
Assembly was easy though. I just dropped all the pieces in, screwed
the top down tight and shook it for 5 minutes. (The shaking was the
hard part - that baby is heavy!)
Thanks to some very good help from Dale (dmo), I can see the way to
get the last bits in place. Then I'll tackle getting the layshaft
through its thrust washers. :-0 Yes, it has been educational and
very rewarding.
--
Jim Muller
jimmuller@rcn.com
'80 Spitfire, '70 GT6+
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|