All
I have successfully disassembled my steering box with one exception. I cannot
seem to get the upper bearing race out. I could sure use a hint or suggestion.
I can catch underneath with a screw driver, but prying has not dislodged it.
Somewhat surprisingly, the rocker shaft peg did not appear to be worn. The
metal was a bit shiny at the wear point, but definitely no flat sides.
Any other inspection tips on the components are appreciated.
Thanks
Ed
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|