I own a 1962 TR4. The specification for the camber on the front end is listed
as 2 degrees positive in the repair manual. However I have noticed several
parts offered which can give you a fixed, or adjustable negative camber setting
. My question is if there is a handling advantage in changing from the stock
specification to the negative setting ?
Thanks,
Jeff W. Kimbrell
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|