Ceramic magnet on a stick and sweep under the bench going deeper each
time.
On 27-Oct-08, at 10:08 PM, triumphs-request@autox.team.net wrote:
> To: "Triumphs" <triumphs@autox.team.net>
> Subject: Re: [TR] drill bits and taps
>
>
> I went a slightly different path..
> While at Sears one day I found a set of rethreading taps and dies.
> They look
> like cut off taps. They are one of the greatest set of tools I own.
> I never
> cross threaded anything and they are great for just cleaning out
> threads
> after or before sand blasting or painting. Now if I can just find that
> 3/8-UNF one that rolled under the workbench two weeks ago....
>
> Dave Connitt
> '67 TR4A IRS
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|