Thanks Randall/Andrew/Terry for the guidance b Ibll go with new
trunnions/upper arms and let you know how it works out.
From: terryrs@comcast.net [mailto:terryrs@comcast.net]
Sent: October-22-08 7:27 PM
To: Randall
Cc: Cameron Joyce; triumphs@autox.team.net
Subject: Re: [TR] Trunnion Shafts
So, I would (did) just buy new trunnions. YMMV and all that.
> My parts source recommends new ones ( and going
> to 3 degree vs. original 0 degree),
Having bought that t-shirt, I'd echoe Randall's advice. I replaced the
trunnions in my TR3A frame-off. They've held up extremely well. The
toughness in steering exacerbates when it's been awhile since last greasing
the suspension, and I expect will improve remarkably when I install the new
poly silentblocs.
No wuuhries, mate.
Terry Smith, '59 TR3A
New Hampshire
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|