The latest auto tech school books have bench bleeding as the standard
for installing / rebuilding a master cylinder. Obviously from the
post on the subject, it still works the "older" way. My text says it
removes air from inside the MC. I guess that might make it a little
easier in that it might put less air in the lines resulting in less
bleeding all around.
Doug
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|