triumphs
[Top] [All Lists]

Re: [TR] Spitfire-dragging disc caliper

To: "'Tim Gaines'" <mtgaines@mail.presby.edu>, <TRIUMPHS@autox.team.net>
Subject: Re: [TR] Spitfire-dragging disc caliper
From: "Joe Curry" <spitlist@cox.net>
Date: Fri, 24 Oct 2008 11:25:49 -0700
Check to see if you have clearance on both sides of the caliper to the disk
itself.   I have seen instances where one side rubs against the disk.  This
can be corrected with shims or by modifying the calipers.

Joe

-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of Tim Gaines
Sent: Friday, October 24, 2008 11:06 AM
To: TRIUMPHS@autox.team.net
Subject: [TR] Spitfire-dragging disc caliper

I replaced the disc calipers on my 1980 Spit with rebuilt ones at the 
same time I replaced the braided hose connectors all around (but not 
the brake lines themselves).  I now get pulling to the right.  I have 
done the pressure bleeding process twice.  I am wondering if there is 
any scenario with air in the line that would cause one side to stick 
but not the other.

Thanks for advice.

Tim Gaines
Clinton, SC

1980 Spitfire
1974 TR6
This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

You are subscribed as spitlist@cox.net

http://www.team.net/archive
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>