triumphs
[Top] [All Lists]

[TR] jet adjustment

To: "list Triumph" <triumphs@autox.team.net>
Subject: [TR] jet adjustment
From: "dorpaul" <dorpaul@bellsouth.net>
Date: Tue, 14 Oct 2008 09:30:32 -0400
Yesterday when I had my TR3's engine running, I tried but couldn't get to the
needle level adjustments on the SU's to balance the H6's.  I wonder if I
should have tried harder.

However, I removed both air filters and saw that both pistons were 3/4's of
the way down and opened in sync. when the rpmmmm's were increased.  I had
already ball-parked their fast (or is it their slow) idle adjustment.  Does
this sync. suggest that they were needle-height-ok-adjusted?

After running it at various low rpmmm's I shut it off with the KEY SWITCH!  I
removed all the plugs and they all looked equally flat sooty straight black.
Does this mean turns of  the jet adjustments equally up or is it down?

Thanks,
Paul Dorsey


BTW- One plug was a Champion L182Y.  Any difference?

--
I am using the free version of SPAMfighter for Personal use.
SPAMfighter has removed 947 of my spam emails to date.
Get the free SPAMfighter here: http://www.spamfighter.com/len

The Trial and Professional version does not have this message in the email
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>