triumphs
[Top] [All Lists]

[TR] Door seals

To: triumphs@autox.team.net
Subject: [TR] Door seals
From: AA00727@aol.com
Date: Tue, 7 Oct 2008 22:55:48 EDT
Hi All,
  l am still looking for pictures or drawings or even a good  description of 
the lower door seal location for a '62 TR-3? The middle part is  obvious as 
there are holes for the metal clips. At the forward end there's  another hole 
of 
the same size but set further inboard and part way up the  vertical section 
of the inner panel, just below the mounting points for the  lower door hinge, 
so if it is for the seal, the seal would be bending  upward around the curve of 
the inner panel and away from the outer door  skin. Where the rear portion 
should stop is even less obvious. The holes  stop about 3-4 inches from the 
rear 
bottom corner of the outer door skin. Isn't  that a rather large gap?  
 I have had three other people ask me to forward any pictures I get as  they 
are wondering the same thing. Thanks for any help you can provide!
 
Gary B 
 





**************New MapQuest Local shows what's happening at your destination.  
Dining, Movies, Events, News & more. Try it out!      
(http://local.mapquest.com/?ncid=emlcntnew00000001)
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>