> But if this number is quite far off what is expected for
> those kits, then we know something.
Unfortunately, the diameter for the conversion kit is closer to 2.520. So
the conversion seal isn't going to work with the MF crank, unless it's
modified.
But .150 or so per side isn't all that much, so it's still possible the MF
seal will fit into the conversion housing.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|