To the list,
I was just sitting here this morning drinking a cup of coffee, reading emails
from the list waiting for everyone else to get up. It just occured to me that
I have not installed my brake cylinders correctly! I know for a fact that the
cylinders do not slide back and forth in the slot on the backing plate! If I
had not asked you guys about this, months from now, as I sit there in my newly
restored car with the brakes squealing like a pig I would have no clue where
to start looking...
To make matters worse, The corrective action would have to be a major
disassembly once the car is running. RIght now, the chassis is sitting on saw
horses and very easy to work on.
Thanks again to all that helped out. I truely don't know what we would do
without this list! I will be sure to add this critical information to my
restoration web site.
I have to go watch the Bengals loose but will tackle this as soon as I get
back home.
Thanks again to everyone!
Dave Connitt
'67 TR4A
http:\\home.fuse.net\davestr4a
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|