> You can adjust this to a
> point by making custom figure 8 gaskets out of proper
> thickness shim stock.
FWIW, Mordy Dunst can laser-cut custom Fig 8 gaskets in a variety of
thicknesses. Don't recall the price, but it wasn't much.
http://www.headgasket.com/
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|