In a message dated 9/18/2008 10:05:46 AM Central Daylight Time,
mmarr@notwires.com writes:
> Knurling a shaft that is a loose press fit or making random center punch
> marks on the OD of a bushing that is a little loose are old machinists
> tricks that would get you fired in the shop that I worked in back in the
> 60s. Now, it appears, it is a valid production technique! I will make my
> own assumption as to the source of the pumps Randall refers to...
>
We're talking about the same folks who laced baby formula with melamine
Dave
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|