triumphs
[Top] [All Lists]

Re: [TR] Gas tank glop

To: "Karl Vacek" <KVacek@ameritech.net>, "Triumph Email List"
Subject: Re: [TR] Gas tank glop
From: "Roger Helman" <rhelman@gmail.com>
Date: Thu, 18 Sep 2008 08:57:35 -0700
Karl,

I am doing this with a 75 TR6 parked under very similar circumstances. I am
using a system from por-15 to clean out and restore the inside of the gas
tank.
I am actually doing both My 71 and the 'new'  75 at the same time. Hopefully
this will never be an issue with either car again.


The Por-15 system comes with "Marine Clean" which removes all the crud in
the tank.

go to http://www.por15.com/prodinfo.asp?grp=FTRK&dept=11 for more info.



And yes the smell is terrible. I had to throw away my gloves, jacket and a
pair of jeans. The smell does not wash out.

Roger
Spokane, WA

On Thu, Sep 18, 2008 at 8:28 AM, Karl Vacek <kvacek@ameritech.net> wrote:

> Finally finished Jill's MG and now I finally get to work on my "new" TR4.
>
> The PO had "restored" it and then parked it for 25+ years, with a full tank
> of
> gas.  He then pulled it out of storage and spent a couple of days trying to
> get it running - on the old gas.  Incredible how bad it smells.
>
> I've removed all of the fuel system, and most of it is straightforward to
> clean and rebuild.  However, the gas tank has a thick sediment on the
> bottom -
> not grit, not rust, just (apparently) decomposed unleaded gasoline.
>
> I don't have a reliable radiator shop nearby to "boil" it out, though I can
> take it 50 miles to a good guy if necessary.  I won't use "Gas Tank Renu"
> (if
> they're still around) because I don't want a big hole cut in this
> otherwise-beautiful, solid tank.
>
> Looks like it might come out fairly easily with the right solvent, and
> that's
> what I plan to try before going to more extreme measures.  I'll get the gas
> gauge sending unit out first, of course, make proper plugs for the
> openings,
> and put some brass nuts and bolts into the tank (only if necessary) to help
> scrape the sludge off.
>
> My only question is what solvent will be most effective.  In the absence of
> any better ideas, I'll start with lacquer thinner, but before I start
> pouring
> expensive solvents into it, anyone seen this glop and know of something
> that
> works better ??
>
> Thanks !
> Karl
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>