On Sep 9, 2008, at 5:56 PM, davewillner wrote:
> Heat gun and putty knife works well on flat surfaces
And if you can get to the other side of the sheet metal, heat that up
and you can remove it without melting the the whole mess.
--
Darrell Walker
66 TR4A IRS CTC67956L
Vancouver, WA, USA
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|