At 08:48 AM 8/27/2008, John & Pat Donnelly wrote:
>Is there a special tool to tighten the outer ring that fastens the ignition
>switch? I've never been able to mine tight enough and the switch turns as I
>turn the key.
There was one recently on ebay. Unfortunately it seems to be over
and I didn't bookmark the item - maybe it'll be reposted. About $15
as I recall.
--
J.C. Hassall
Blacksburg VA
'63 TR4 in autox preparation
96% finished, 90% to go
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|