From: Gary Nafziger <nafzigerg@yahoo.com>
> Subject: [TR] no oil pressure after dizzy change-resolved i think
> problem was no oil pressure after dizzy change. I had turned the skew gear
> that runs off cam shaft in order to turn the dizzy since vacuum canister was
> hitting block. In doing that I hadn't thought about the oil pump shaft at all
> ,and apparently they didn't mesh................................... so no
> pressure on start up. <snip>
> gary n
> ****************************************
Gary: we are all learning. Credit to you for sorting it out!
Brian
Non-professional, though enthusisatic wrench, with a TR4
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|