Hello list,
I'm right in the middle of a front suspension rebuild on my '60 TR3A. All
four of the upper control arms (upper A-arms) were cracked, so I obtained
replacements for them. I rebuilt the R/H suspension...no problem. I'm
working on the L/H side, and I realized today that at least one of these two
replacement arms is bent, so I want to obtain another pair ASAP, as it's
holding up my rebuild. I'm 90% sure it's just the L/H rear arm that's bent,
but I'd be willing to buy the pair just to be sure I get two straight ones.
Does anybody want to sell a good pair of upper control arms that have been
"reinforced" (boxed in along the bottom edge)? If so please contact me
off-list since I get the digest.
Thanks in advance,
Steve Ball
Lompoc Ca
TS68164L
email: banjonut@verizon.net
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|