List,
I am only needing to screw on and fasten the nut to the horizontal bolt-arm of
my ball joint to the upper wishbone arms.
I jacked up the front right wheel lugs in order to get it thru the wishbone
hole. However when I do so, it does compress the spring, and raises
everything.. In fact, the side arm of the ball joint unfortunately raises the
upper wishbone arm. How can I get it to sit still and allow the b.j. arm to
go thru it (so that I can get a nut on it?)
Thanks, Paul Dorsey 60 TR3
--
I am using the free version of SPAMfighter for private users.
It has removed 865 spam emails to date.
Paying users do not have this message in their emails.
Get the free SPAMfighter here: http://www.spamfighter.com/len
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|