dorpaul wrote:
> Is a lockwasher that stays flat, even after it's removed from the bolt, no
> longer any good?
>
>
>
Very occasionally, you might find one that has a little smear on the cut
end from the shear that might hold the lockwasher in that position, but,
almost always, it's a sign that the lockwasher is just plain tired out.
Hey, they're cheap. Replace `em.
Cheers.
--
Michael Porter
Roswell, NM
Never let anyone drive you crazy when you know it's within walking distance....
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|