triumphs
[Top] [All Lists]

Re: [TR] Sears Engine Analyzer 161.216300 Instructions

To: <triumphs@autox.team.net>
Subject: Re: [TR] Sears Engine Analyzer 161.216300 Instructions
From: "Randall" <tr3driver@ca.rr.com>
Date: Fri, 8 Aug 2008 13:37:04 -0700
> A green lead, ending in a crocodile
> clip;

That's the point lead.

> a double lead that ends in a metal plate that looks like a door
> lock striker plate (probably to measure alternator output).

Or any other current you care to measure.

> It also
> has a 2-inch wire with male and female spade connectors, one at each
> end.

I'd guess that's part of the current probe, to be inserted into the circuit
and mated to the "striker plate" mentioned above.

> I find it rather surprising in the internet age, that Sears have not
> made instructions for their products available online for download.

How long do you suppose that model has been obsolete, 30 years?

> hints at a dinosaur lurching to its
> final demise.

Could be, but just try downloading a datasheet for an Intel 8080, which is
newer than your analyzer...

Randall
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>