triumphs
[Top] [All Lists]

Re: [TR] TR3A Grill

To: "'Bill Beecher'" <bill_beecher@flash.net>, <triumphs@autox.team.net>
Subject: Re: [TR] TR3A Grill
From: "Joe Laurito" <trglory@comcast.net>
Date: Tue, 5 Aug 2008 08:57:00 -0400
Bill;

My grill installs flat & I finally got a chance to take some measurements.
The opening in the apron is a hair under 8 inches at the center and about 43
inches wide at the widest point.

Joe

-----Original Message-----
From: triumphs-bounces+trglory=comcast.net@autox.team.net
[mailto:triumphs-bounces+trglory=comcast.net@autox.team.net] On Behalf Of
Bill Beecher
Sent: Sunday, August 03, 2008 10:14 PM
To: triumphs@autox.team.net
Subject: [TR] TR3A Grill

Hello List,
 
Just unboxed my new grill to find it is perfectly flat.  The old grill is
sort of concave and fits the opening in the apron just fine.  
 
It the correct TR3A grill supposed to be flat or is this just the way it
ships and you shape it to fit the opening?   Or, has my front apron been so
re-worked that the opening is 2" shorter than it should be?
 
Thx,
 
Bill B
'58 TR-3A TS/30766 L
'59 TR-3A TS/64974 LO
"A Triumph is man's best friend, it always comes when it is called...of
course, some times it is difficult to make it go"
_______________________________________________
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>