Relay it, for heaven's sake!!!!!!!
Jonmac
----- Original Message -----
From: <DLylis@aol.com>
To: <triumphs@autox.team.net>
Sent: Thursday, July 03, 2008 11:43 PM
Subject: [TR] what a blast!
> After seeing the pics of the 3A that was crushed by a truck in Toronto, I
> have decided that I am installing super loud horns on my 3A. I have
>selected a
> Wolo horn with an integrated compressor that really BLASTS. It is fairly
> discreet and can install out of the way. The wiring recommended for this
>thing
> is 16 gauge so I don't think I have problem there, however, there are
> instructions to wire it one way if you are using the factory horn button and
>to
> wire it another way with a relay if you are installing a secondary button.
>That
> tells me that they are assuming that the factory installed a relay for the
> factory horns (?). Unless I am missing something big, that is not the case
> with the 3A. I have the 2 Bentley wiring diagram and there is no horn relay
> and I have not found one on my 3A.
> To relay or not to relay. That is the question.
>
> David Lylis
> 69 TR6 CC26160L
> 60 TR3A TS74461LO
>
>
>
> **************Gas prices getting you down? Search AOL Autos for
> fuel-efficient used cars.
>(http://autos.aol.com/used?ncid=aolaut00050000000007)
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as standardtriumph@btinternet.com
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|