On 21 Jun 2008 at 16:29, marty sukey wrote:
> Pulled the differential out of the Spitfire today to replace the
> mounting bushings. Crap, what a job. The only way I was able to
> get one out was to cut through the side of the sleeve.
Which bushings would that be, the ones at the rear holding the
lateral bolt? When I did mine some years ago I had to cut the bolt
out with a hacksaw blade because it was frozen to the inside of the
bushings. Then I removed the bushings by cutting out the rubber and
using a hacksaw blade from the inside of the bushing to cut into the
outer rim. Putting the new ones in was easy though once the hole was
cleaned up.
--
Jim Muller
jimmuller@rcn.com
'80 Spitfire, '70 GT6+
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|