I had thought that trunnion pins for the 3/4 were available
separately and could be pressed in after removing the old one. After
checking the catalogs I don't see any. Anyone know if they can be
obtained and pressed into an old trunnion which is good except for
the pin.
Allen
TR4
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|