triumphs
[Top] [All Lists]

Re: [TR] steering column inner bushings

To: "Randall" <tr3driver@ca.rr.com>, <triumphs@autox.team.net>
Subject: Re: [TR] steering column inner bushings
From: pethier@comcast.net
Date: Wed, 18 Jun 2008 04:27:30 +0000
Since i repaired the ground path on my TR4 steering column, the horn works.

Of course now it beeps by itself now and again.  Common bushing problem, or 
something else?

--
Phil Ethier  West Side  Saint Paul Minnesota  USA
1962 Triumph TR4 CT2846L, 1992 Saturn SL2, 1993 Suburban,
1994 Miata C package
pethier [at] comcast [dot] net    http://forum.mnautox.com/forums/
http://www.flickr.com/photos/pethier
I decry the textmessagization of the American-English language.

 -------------- Original message ----------------------
From: "Randall" <tr3driver@ca.rr.com>
> > Any advice on how to remove and replace the inner bushings on 
> > a TR4 steering column?
> 
> Never done a TR4 myself, but from the Bentley they look to be the same
> rubber/steel/nylon things used in the later TR3/A/B columns.  You just need
> more force to drive them out; like a big length of iron water pipe.
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>