A Manco gauge is a very low tech way of measuring toe-in, by showing the
difference in width between the rear of the front tires and the front of
the front tires. It will not show whether the wheels are tracking
straight ahead. That can be determined if the car is pulling one
direction or the other. The PDF below shows it being used on a Toro
workman and includes the directions for it's use.
Bob, your welcome to use it whenever you want it. I can drop it up to
you next weekend if you'd like. Golf would be good too:) John
http://www.toro.com/customercare/commercial/bulletins/vehicles/pdf/12-05.pdf
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|