List,
Exactly the problem I had with mine this past summer, wet but not dripping
fuel. Please include me in your response to Scott.
Thanks,
Bill B
'58 TR-3A TS/30766 L
'59 TR-3A TS/64974 LO
"A Triumph is man's best friend, it always comes when it is called...of
course, some times it is difficult to make it go"
-----Original Message-----
From: triumphs-bounces+wbeech=flash.net@autox.team.net
[mailto:triumphs-bounces+wbeech=flash.net@autox.team.net] On Behalf Of Scott
Suhring
Sent: Monday, April 14, 2008 8:20 PM
To: Triumph Mail List
Subject: [TR] FW: SU leaks
I am posting this for a friend. He is frustrated and is looking for some
ideas. TIA
Scott Suhring
Mechanicsburg, PA
'70 TR6
'59 TR3
_____
From: John Krause [mailto:jktr250@gmail.com]
Sent: Monday, April 14, 2008 9:53 PM
To: Scott Suhring
Subject: SU leaks
Scott, can you post this for me?
SU leaks. I rebuilt my TR3 H-Series SU carburetors and they both leaked
around the jet assembly. So I replaced the cork seal, after soaking it in
oil, a second time and then used the Moss Motors O-Ring (leak-free
replacement for the small cork seal), but they still leak. I am certain
that I have them assembled correctly. They do not appear to be dripping,
but the jet assembly is always wet with fuel. Any suggestions?
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
You are subscribed as wbeech@flash.net
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|