George, See below: One possible buyer for my early 1962 TR4 body shell
would like to use it on his 1966 TR4A frame. It appears the body will
fit with no problem but we are not sure. What is the collective wisdom
here? Depending on whether your floors were ever replaced, the holes
from the body to the TR4A frame might not line up in the rear. I know
when I replaced my floors on my early TR4, the new floor pans had rear
holes drilled for the 4A and I had to drill the holes for the 4, and
had to plug the rear holes for the 4A. Older floor pans have no such
place for the 4A rear holes to exist. Regards, Rich 61TR4
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|