GM has an adhesive that is used in place of welding. I have not used it but
others on this forum have. My understanding is that it is quite effective
Jerry Stasyszen
OKCSpitfire@sbcglobal.net
76 Spitfire
-----Original Message-----
From: triumphs-bounces+jstasyszen=odmhsas.org@autox.team.net
[mailto:triumphs-bounces+jstasyszen=odmhsas.org@autox.team.net] On Behalf Of
tom white
Sent: Thursday, April 03, 2008 9:29 AM
To: triumphs@autox.team.net
Subject: [TR] Exhaust weldiong.
Hi List,
I am hanging new exhaust on my car. I have decided to use "V-clamps" as
connectors between the butt ends of the pipes. These require welding a
stainless steel ring onto the end of the pipe. I am wondering if I could
reliable install these rings with JB Weld instead of trying to weld the
stainless to mild steel?
Best regards,
Tom
_________________________________________________________________
Pack up or back upuse SkyDrive to transfer files or keep extra copies. Learn
how.
hthttp://www.windowslive.com/skydrive/overview.html?ocid=TXT_TAGLM_WL_Refresh
_skydrive_packup_042008
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
You are subscribed as jstasyszen@odmhsas.org
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|