> Don't
> recall the number for the 3.45 ratio offhand, but I think
> it's 38 (11 tooth pinion).
Oops, forgot to mention that AFAIK the 3.45 gears were never originally
fitted to the TR2-4A. However, the 3.45 gearsets from the PI TR5-6 (and
various other Triumphs) will fit, so might be found in a TR3/A axle. I was
planning on doing that myself, before the car got wrecked, to make up for
the short tires I used.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|