At 06:55 AM 3/28/2008, dorpaul wrote:
>List,
>For some reason, I hadn't realized that .75 bore Rear Wheel Cylinders are not
>available. If that is true,
>it looks like I'll need to order two .70 bores instead of just replacing the
>one that is the only one needed. Is this true?
You want your rear cylinders to be the same size, unless you find
unpredictable braking exciting. It ~probably~ wouldn't be
noticeable, but then the difference could show up at the worst
possible time. With all you've put into that car, I'd spend a few $$
extra and replace both to match.
Jeff Scarbrough
Inadvertent Swerve, Ga.
--
Checked by AVG.
Version: 7.5.519 / Virus Database: 269.22.0/1344 - Release Date: 3/26/2008 8:52
AM
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|