In a message dated 3/17/2008 12:11:02 PM Mountain Daylight Time,
Brian_Lanoway@standardaero.com writes:
drill through the carpet and snap sets to position
I really don't think you want to do that. I did something similar once and
my wife learned a few new words as I watched one of the weft threads in the
carpet spin up on the drill bit and unravel the pile.
How about clicking the female bits to the old male on your car, dabbing a
bit of blue chalk line chalk on them and then laying in the carpet and patting
firmly. Should leave a pretty decent mark on the bottom of the carpet.
Robert B. Houston
Texan in New Mexico
63 TR4
As he stared at her ample bosom, he daydreamed of the dual Stromberg
carburetors in his vintage Triumph, highly functional yet pleasingly formed,
perched prominently on top of the intake manifold, aching for experienced
hands, the small knurled caps of the oil dampeners begging to be inspected and
adjusted as
described in chapter seven of the shop manual.
Dan McKay
**************Create a Home Theater Like the Pros. Watch the video on AOL
Home.
(http://home.aol.com/diy/home-improvement-eric-stromer?video=15?ncid=aolhom00030000000001)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|