> Now you're confusing me. You said they didn't change
> trunions (or vertical
> links) when they added caster to the TR4.
Well, I certainly didn't mean to say that ... what I tried to say is that
the vertical link did not change. The trunnions DID change, and became
different from side to side.
> Are these 3 deg trunions different than what is
> used on the TR4A-TR6?
Yes, they are unique (AFAIK) to late TR4. As I said, visually they look
nearly identical to the earlier trunnions, the only difference is the 3
degree angle between the pin for the A-arms and the threaded bore for the
vertical link. I believe they were literally the same casting, just
machined slightly differently.
The 4A-6 trunnions look very different (starting with not having a pin at
all but a hole for a bolt).
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|