triumphs
[Top] [All Lists]

[TR] TR3 fuel sending unit impedance

To: triumphs@autox.team.net
Subject: [TR] TR3 fuel sending unit impedance
From: "William C. Quincy" <wquincy@cox.net>
Date: Wed, 12 Mar 2008 16:08:30 -0500
I have a question regarding a '60 TR3 and the fuel sending unit, when  
I connect the fuel gauge it is pegged to full, upon disconnecting the  
wire from the sending unit it drops to E. When I measure the  
impedance of the sending unit, with the tank empty it shows 82 Ohms.  
I would like to know what the sending unit should measure when empty  
and full, so I have some idea where to go with this problem,  
additionally any other information regarding this problem would be  
appriciated.
Thanks
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>