triumphs
[Top] [All Lists]

Re: [TR] TR4 rebuild/new brake lines?

To: Randall <tr3driver@ca.rr.com>
Subject: Re: [TR] TR4 rebuild/new brake lines?
From: "Lee&John Howard" <leejohn7@gmail.com>
Date: Wed, 12 Mar 2008 09:49:16 -0700
Thanks to David and Mike for leads on bending tools. HF's pliers are way
cheaper than Eastman's ( see
www.eastwoodco.com/jump.jsp?itemID=10826&itemType=PRODUCT).

Good review on the Eastman tool, though reviewer may be in-house guy, who
knows.

John

On Tue, Mar 11, 2008 at 6:48 PM, Randall <tr3driver@ca.rr.com> wrote:

>        From: DLylis@aol.com [mailto:DLylis@aol.com]
> > I bought a bending tool at HF that does really tight radius bends.
>
> Which one was that, David ?  This thing :
> http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=95782
> ??
>
> Randall
> _______________________________________________
>
> Support Team.Net  http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as leejohn7@gmail.com
>
> http://www.team.net/archive
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>