I received my master cylinders today. I was pleasantly surprised to find
that they are identical to the Girling units right down to the fittings.
The yoke from the originals even threads on to the push rod. No need for
adapters.
$48 for name brand parts sure beats $69 or more for no name
reproductions from the big three.
Mike
Michael Lang wrote:
> I was perusing the Wilwood catalog today and discovered PN 260-6089
> "Compact Remote Master Cylinder" which matches the dimensions of the
> Girling units on the TR3A's. They can be ordered for $48 each off of the
> web. "Cheap" reproduction units are $70 or more from BPNW, TRF, etc.
> Anybody have any experience with using these?
>
> I haven't had time to do a search for inlet and outlet fitting sizes.
> The Wilwood unit has 7/16-20 inlet and an 3/8-24 outlet which probably
> wouldn't be too difficult to adapt if they don't match.
>
> Thanks,
>
> Mike
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|