Hello folks:
I have the radiator out of our '76 TR6 for installation of an electric
cooling fan, and I'd like to flush the block based on the rusty stuff that
came out of the radiator.
There's a large hex-head bolt or plug on the starter side of the block
toward the rear. Is that a block drain plug?
If so, can the block be flushed adequetly w/o removing that plug? (looks
like it's a bear to get at).
Anyone have a suggested method or sequence for flushing the system?
TIA,
Tom
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|