triumphs
[Top] [All Lists]

[TR] engine rebuild

To: triumphs@autox.team.net
Subject: [TR] engine rebuild
From: "acs25m@swbell.net" <acs25m@swbell.net>
Date: Tue, 19 Feb 2008 01:35:54 -0800 (PST)
I have a question for the list. What is the best way to get oil pressure up on 
a newly rebuilt engine. It is a TR250 with a new oil pump,bearings and rings. 
Assembly lube was generously used in the rebuild. Should I just turn the engine 
over sans plugs or would I be better off to make a connecting piece and turn 
the pump with a drill motor?
  John Maneke
  TR250
  CD3025L
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>