I have both read and heard that the pre TS50000 cars had a shrunk on
flywheel that used a shrouded starter and the post TS50000 cars had a
bolt on ring gear and used an open ended starter that has the bendix
spring on the end of the shaft.
I was just preparing to rebuild a starter for my project car and found
the both of the cars that I have had bolt on ring gears and shrouded
starters. Neither car ran when I got them so I don't know if either of
the starters worked.
Am I misunderstanding something or do I indeed have an incorrect
starter/flywheel combination on both cars?
If they are wrong, it looks like I am in the market for either a
flywheel or starter. One of the two starters looks to be either fairly
new or freshly rebuilt. Anyone interested in a swap?
Mike
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|