Wow, that really has gone up. I had my front and rear TR-6 bumpers
done there about 10 years ago for around $500ish.
Joe
THOMAS FANSHER wrote:
> I had my TR3A front bumper done and windshield also the valve cover at Space
> Coast Plating in Melbourne, Fl. really good job cost -- about $1000.00 US.
> Had the TR4 bumpers and valve cover and the inserts to the Minilite knock
> offs done for $1250. EXCELLENT job. no reservations, does take some time
> so don't be in a hurry.
> Tom
> ----- Original Message -----
> From: "Carl TR" <cfmtr3a@verizon.net>
> To: <auprichard@comcast.net>; <triumphs@autox.team.net>
> Sent: Wednesday, January 23, 2008 7:53 PM
> Subject: Re: [TR] Chroming
>
>
>
>> I had the frame and stanchions done about 3 years ago (along with bumper et
>> al). but just those items were listed as $365. They still look like they
>> did when I picked them up. Breakdown was probably $265/50/50. The
>> invoice
>> has faded/torn and I can't read the company name in Melbourne. May have
>> been Spacecoast Plating. Sort of fits the shape of the letters.
>>
>> Prices are 3 years old so could be more now.
>> Carl
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|